Technical Data - Viking AMM 842 Gebrauchsanweisung

POSITIVE DRIVE BELT
Both blades are powered inside the deck by a pos-
itive drive belt.
If one of the blades has struck a solid object (e.g. a
stone), the belt tension may be altered. This can
lead to the positive drive belt 'over-meshing'
which, in the long term, can damage the blades.
Following a powerful collision, always
check that both blades are at right-an-
gles to each other (fig. 13).
The working areas of the blades overlap each oth-
er. If the blades' position in relation to each other
has been altered, there is a considerable risk of the
blades striking each other. This can entail serious
damage to the cutting deck.
If this is the case, take the machine and cutting
deck to a service workshop for repair and inspec-
tion.

TECHNICAL DATA

AMM 842
Cutting width 107 cm
Cutting height 30-85 mm
Net weight 53 kg
ENGLISH
AME 842
107 cm
30-85 mm
53 kg
EN
9