Maintenance And Cleaning; Environmental Protection; Declaration Of Conformity - Bosch GSM 200 Bedienungsanleitung

EURO • Printed in Germany • BA 1 609 929 488 • GSM 175/200 D • GB
1 609 929 488 - Buch Seite 3 Donnerstag, 15. August 2002 9:24 09
Cool the workpiece in water from time to time.
For grinding hard metal workpieces, use silicon
carbide C grinding wheels (accessory).
Protect the grinding tool from impact, shock and
grease.
Do not work with materials containing asbes-
tos.

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
Always keep the machine clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
WARNING! This appliance must be earthed.
Important instructions for connecting a new
3-pin plug.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
earth = green/yellow
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.

Environmental Protection

Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
11 • 1 609 929 488 • 02.08
Service and
Customer Assistance
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Service
Advice line
Fax
.............................................
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Service
Fax
....................................................
Australia
Robert Bosch Australia L.t.d.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
...............................................
Fax
...............................................
www.bosch.com.au
To be fitted
E-Mail: CustomerSupportSPT@au.bosch.com
by a qualified
professional only
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
.....................................................
Fax
.....................................................

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 61 029
according to the provisions of the directives
89/336/EEC, 98/37/EC.
Dr. Gerhard Felten
Senior Vice President Engineering Head of Product Certification
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
English - 3
+44 (0) 18 95 / 83 87 82
............................
+44 (0) 18 95 / 83 87 91
....................
+44 (0) 18 95 / 83 87 89
+353 (0)1 / 414 9400
...................................
+353 (0)1 / 459 8030
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
Dr. Eckerhard Strötgen