Environmental Information - GUTMANN Llano Montageanleitung

6. Create a screwed connection between the
hood/cupboard fixture and the fitted cupboard
(1.), and then tighten the cupboard fixture on
the hood (2.).
7. Direct the exhaust air hose and the
electrical line connection to the hood. Pay
attention that the exhaust air hose is installed
without kinks. Fasten the exhaust air hose to
the exhaust air connection using a hose
clamp.
8. Create the electrical connection between
the hood and the supply line.
9. In case of ceiling suspension by means of
threaded rods/hanger bolts: Use the drilled
fastening holes (X) at the top in the hood body.
10. After completion of installation, carry
out a functional test.
Disposal Packaging
The appliance packaging is recyclable.
Cardboard and polyethylene film (PE) are
used as packaging material. These materials
must be disposed of in an environmentally
friendly manner and in accordance with the
currently valid on-site regulations

Environmental Information

This appliance is labelled in accordance with
European Directive 2002/96/EG conceming
used electrical and electronic appliances
(waste electrical and eleclronic equipment -
WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
Please ask your dealer about current means
of disposal.
en