Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use; Safety; Basic Safety Instructions - Silvercrest SLB 1.2 C2 Bedienungsanleitung

Aktiv-lautsprecher
Vorschau ausblenden Andere Handbücher für SLB 1.2 C2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 61
CAUTION
A warning of this risk level indicates potential
damage to property .
Failure to avoid this situation could result in damage to property .
Follow the instructions in this warning to prevent damage to
property .
NOTE
A note indicates additional information that will assist you in
handling the device .

Intended use

These speakers are information electronics devices designed exclusively
for connection to a PC, a notebook, or an audio device* (e .g . MP3
player) via a 3 . 5 mm jack plug . This device is exclusively for private use,
and is not intended for industrial or commercial purposes . The device
is not intended for any other use or for uses extending beyond those
stated . Claims of any kind for damage arising as a result of non-intended
use will not be accepted . The user is the sole bearer of the risk .
* If the loudspeaker is to be connected to a device without a USB
connection, an external power supply with USB output is required
(not included in delivery) . The mains adapter should have the fol-
lowing specifications: 5 V

Safety

This section provides you with important safety information regarding
the handling of the device . The device complies with the statutory
safety regulations . Incorrect usage can lead to personal injury and
property damage .

Basic safety instructions

For safe handling of the device, follow the safety information below:
Check device for visible external damage before use . Do not use
devices that have been damaged or dropped .
Damaged cables or connections should be replaced by the
Customer Service department .
Always grasp the connection cable by the plug . Do not pull on
the power cable itself!
Do not place any objects, furniture or similar on the connection
cable and make sure that the cable is not trapped .
Never make a knot in the connection cable and do not bind it
together with other cables . The power cable should be routed
so that it cannot be stepped on or tripped over .
SLB 1.2 C2
, min . 500 mA .
 3
GB

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Slb 1.2 d2

Inhaltsverzeichnis