Monacor TVCCD-452COL Bedienungsanleitung Seite 11

Please unfold page 3. Then you can always
see the operating elements and connections
described.
1 Operating Elements and Connec-
tions
(fig. 1 and 2)
1 Lens cover
2 C-mount adapter ring for screwing on a
C-mount lens
3 Threaded ring for screwing on a CS-mount
lens
4 Hexagon socket screws for readjusting the
mechanical focus setting for the lens
5 One DIP switch each for switching on (posi-
tion "ON") or switching off (position "OFF") of
the following functions (see chapter 7.1):
– automatic electronic shutter ESC
– backlight compensation BLC
– flicker compensation F/LESS
6 BNC jack for the video output
7 Power LED
8 Screw terminals DC12V and GND for con-
necting the power supply
9 Adapter with thread jack [thread 6.3 mm (
for mounting the camera;
to be screwed on the upper or lower side of
the camera
10 Selector switch for the operating mode ("ATW"
or "PUSH") for the automatic white balance –
see chapter 7.1
11 Selector switch for adjusting the camera to
the AI lens type used [AI = "auto iris" (auto-
matically controlled iris)]
"VIDEO": for a lens controlled by video sig-
nal
"DC": for a DC controlled lens (DC lens)
12 Control for adjusting the video signal level
when using a DC lens
13 Jack for connecting a lens with automatic iris
control (AI lens);
depending on the switch IRIS (11), the jack
has the following pin configuration:
GB
1
/ ")]
4
11