Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BAUTEILE DER MOTORSENSE
DE
1 – Einhangvorrichtung für Schultergurt
2 - Ein- / Aus - Schalter
3 - Auspuffschutzgitter
4 - Zündkerze
5 - Luftfilter
6 - Tankdeckel
7 - Kraftstofftank
8 - Gashebel
9 - Handgriff /Schutzstange
GB
WARNING: The brush cutter, if properly used, is a quick, confortable and efficient tool; if
used improperly or without due precautions it could become a dangerous tool. To ensure your
work is always pleasant and safe, please respect the following safety precautions scrupulously
and throughout this manual.
WARNING: The ignition system of your machine produces an electromagnetic field of very
low intensity. This field could interfere with certain pacemakers. To reduce the risk of serious or
fatal injury, persons with pacemakers should consult their doctor or the manufacturer of the
pacemaker before using this machine.
WARNING! – National regulations could limit the use of this machine.
1 - Do not operate the machine unless you have received specific instruction on its use. First time users
must familiarise themselves thoroughly with the operation of the machine before working in the field.
2 - The machine must only be used by adults in good physical condition who are familiar with the
operating instructions.
3 - Never use the brush cutter when you are tired or under the influence of alcohol, drugs or medication.
4 - Wear appropriate clothing and safety equipment such as: boots, heavy-duty trousers, gloves,
protective eyewear, ear protection and protective helmet. Use close fitting but comfortable clothes.
5 - Do not allow children to use the brush cutter.
6 - Do not allow other people to stand within less than 15 metres while using the brush cutter.
7 - Before using the brush cutter, make sure that the blade fixing bolt is well-tightened.
8 - The brush cutter must be equipped with the cutting accessories recommended by the manufacturer.
9 - Never use the brush cutter without the blade guard or the head guard.
10 - Before starting the engine, make sure that the blade is free to move and is not in contact with any
foreign objects.
11 - Every now and then while working, stop the engine and check the blade. Replace immediately if
cracked or broken.
12 - Only use the machine in well ventilated places, do not use in explosive or flammable atmospheres
or in closed environments.
13 - Never touch the blade or attempt any maintenance work while the engine is running.
14 - It is prohibited to fit any device other than that supplied by the manufacturer.
15 - Do not use a machine that has been damaged, poorly repaired, improperly assembled or modified.
Do not attempt to remove or bypass any of the safety devices. Only use cutting attachments indicated
in the table.
16 - All warning labels must be kept in good conditions. In case of damage or deterioration, immediately
substitute them.
17 - Do not use the machine for other applications than the ones specified in the manual.
18 - Never leave the machine unattended with the engine running.
19 - Do not start the engine with the arm not mounted.
20 - Check the brush cutter daily to ensure that all components and safety devices are functioning
properly.
21 - Do not attempt to carry out operations or repairs not included in the normal maintenance. See an
authorised dealer.
22 - When disposing of the machine at the end of its useful life, think of the environment. Take your old
unit to your dealer who will be able to dispose of it in a proper manner.
23 - Only experienced persons who are familiar with the operation and safe use of this machine should
use it. If you lend the brush cutter to someone else, also pass the instruction manual and ensure they
read it before using the machine.
10 - Schaft
11 - Schneidschutzvorrichtung
12 - Schneidblatt
13 - Traggurt
14 – Startergriff
15 - Dekompressionsventil
16 - Vergaserhebel
17 – Ölfüllstopfen
18 - 2-Faden Nylonkopf
SAFETY PRECAUTIONS
6
Werbung
Inhaltsverzeichnis
