Redmond RKA-FP4-E Bedienungsanleitung Seite 8

Fine
Type of food
shredder
Carrot +
Cheese +
Onion +
Cabbage +
Cucumber +
Pod pepper +
Beet +
Apple +
Chocolate +
Raw potatoes +
III. CLEANING AND MAINTENANCE
Clean all nozzles and appliance parts immediately after use.
CAUTION! Switch off the appliance and unplug it before disassembling and cleaning.
Disassembly
1. Remove the pusher from the feed hole.
2. Rotate the vegetable cutter unit 45° clockwise and disconnect it from the motor
unit.
3. Remove the lock ring from the vegetable cutter unit, rotating it clockwise.
4. Take out the removable nozzle.
Cleaning
A2
• Wipe the motor unit with a damp cloth.
• Clean the nozzles and other details of the appliance with soft non-abrasive
cleansers.
• Do not clean the metal parts of the appliance in a dish washing machine, as
cleansing agents may blacken the surface.
8
Coarse Fine grater Coarse Product
shredder grater weight, g
+ + + 500
+ + + 300
+ + 500
+ 800
+ + + 800
+ + 500
+ 500
+ 500
+ 300
+ + 500
• The maximum temperature when cleaning non-metal parts in a dish washer
Processing
should not exceed 60°C.
time
• The parts of the appliance should completely dry at room temperature and natu-
1 min
ral ventilation.
DO NOT immerse the motor drive unit, plug and power cord in water or keep in running
30 sec
water.
40 sec
DO NOT use sponges with hard or abrasive surface, abrasive scouring substances and
40 sec
solvents (benzine, ethyl acetate and others).
40 sec
Storage
Store the assembled appliance in a dry, ventilated place away from heating and direct
40 sec
sunlight.
1 min
IV. BEFORE CONTACTING SERVICE CENTRE
20 sec
30 sec
Problem
1 min
Power cord is not connected to the
appliance and (or) to the outlet
The appliance
Faulty electrical outlet
does not
switch on
Power supply failure
Motor unit
stopped dur- Overload protection activated
ing operation
The appliance is overheated dur-
An off-odour
ing operation
appeared dur-
Some parts of the appliance have
ing operation
protective cover
Possible causes Solution
Plug in the appliance
Plug in the appliance to the working
outlet
Check the voltage supply. In case of its
failure, contact an authorized organiza-
tion
Press ON/OFF, unplug the appliance and
let it cool down for 30 minutes. Clean
the loading tray from remnants and plug
in the appliance
Reduce continuous operation time, in-
crease intervals between switching
The odour will disappear after few uses