Gmini GM1604 Bedienungsanleitung Seite 31

17. Tilt the seat into horizontal position
WARNING:
The pram must be used in horizontal
position, see picture.
To convert the seat into the carrycot, make the following steps:
16. Place the backrest into the lowest position using the strap / clamp located
on the backrest
18. Undo the Velcro fasteners
and loosen the spacer bar
located under the seat.
20. Remove the safety belts (see the section REMOVING THE SAFETY BELTS)
and store them out of reach of children. The belts can be completely removed.
WARNING: Do not adjust the pram into tilted position.
19. Follow the direction of
the arrows, open the buckle
under the pram seat, see
picture.