Gmini GM1604 Bedienungsanleitung Seite 27

FIRST ASSEMBLY OF THE PRAM:
1) STEP ASSEMBLING
SAFETY LOCK
Pull the safety lock upwards with one
hand and open the frame with the
other.
NOTE: UNPACK THE INDIVIDUAL PARTS OF THE PRAM FROM THE BOX.
BEFORE USE, REMOVE AND DISCARD ALL PLASTIC BAGS AND PARTS OF PRODUCT PACKAGING OR
AT LEAST KEEP THEM OUT OF REACH OF CHILDREN!
1. With one hand, pull the safety lock located on the right side of the pram frame upwards, and at the same time,
open the pram frame with the other hand, continuing until the frame opens up completely; the frame is fully
opened only when you hear a click of the safety lock.
NOTE: If you cannot open the pram after pressing the safety lock, push the pram frame slightly downwards and
then repeat the action.
2) STEP – MOUNTING / REMOVING THE WHEELS
Safety lock
against front
2A) FRONT WHEELS
wheel rotation.
2. Mounting the front wheel: insert the wheel axis into the corresponding opening on the front frame until you hear
a click of the safety lock. Perform this action also with the second front wheel.
WARNING: Both wheels must always be simultaneously either locked or freely rotatable!
WARNING: Before you start using the pram, check whether the wheels are well fastened to the pram frame!