Removing The Front Wheel; Removing The Rear Wheel - Gmini GM1604 Bedienungsanleitung

3. Swivelling wheels: The pram is equipped with front wheels which can
be either freely rotatable or secured.
We recommend using secured wheels on discontinuous terrains. Freely
rotatable wheels enable better and easier pram handling on roads with a
flat surface.
4. To lock the wheel (against rotation), rotate the safety lock located on the
wheel cover forwards. Regardless of the position in which the wheel
currently is, when reaching the straight position, it automatically gets
secured. If the wheel is properly locked, you can hear a click of the safety
lock. To unlock it again, turn the safety lock inwards to release the wheels
and they can rotate freely again.
2B) REAR WHEELS:

5. REMOVING THE FRONT WHEEL:

If you need to remove the front wheels (e.g. because of the pram transport
or for the reasons of storage), press the safety lock located on the inner side
of the wheel cover and remove the wheel from its placement.
To remount it, follow the steps described in this manual.
6. Insert the rear wheel pin into the rear axis opening. You should hear a click of
the safety lock. Perform this action also with the second rear wheel.
For the purpose of checking, pull the wheel gently to make sure that it is properly
fixed.
IMPORTANT: Inflate the rear wheel tyres to max. 35 P.S.I. (240 KPa)/(2.4 BAR),
be careful not to exceed the stated value and not to blow the wheel over.

7. REMOVING THE REAR WHEEL:

If you need to remove the rear wheel, pull the safety lock located at the axis
bottom downwards. Then pull the wheel outwards of its placement.
To remount it, follow the steps described in this manual.
WARNING: Before you start using the pram, check whether the wheels are well
fastened to the pram frame!