Inhaltsverzeichnis
Werbung
Untermenü Firmware information (Firmware-Informationen)
Name
Boot code version
Run code version
FPGA1 code ver-
sion
FPGA2 code ver-
sion
Untermenü Runtime information (Laufzeit-Informationen)
Name
Display lifetime
Backlight lifetime
Backlight runtime
Untermenü Measurement information (Mess-Informationen)
Name
Internal tempera-
ture
BLOF temperature
BLOF2 tempera-
ture
Fan speed
Beschreibung
The version of the boot code firmware
The version of the run code firmware
The version of the firmware code for FPGA1
The version of the firmware code for FPGA2
Beschreibung
The time the display has been operating,
including power-save mode
The time the backlight has been operating.
This is also the time the display has been oper-
ating in on-mode (so not in power-save mode)
The time the backlight has been operating
since the last time it was switched off (e.g., in
stand-by). This counter is reset after 1092 min-
utes
Beschreibung
The temperature measured on the Signal board
The temperature measured near the backlight
sensor located at the center of the panel
The temperature measured near the backlight
sensor located at the top of the panel
The speed of the fan
Bildschirmmenü
55
Werbung
Inhaltsverzeichnis
