maruyama MS0735W(CE) Bedienungsanleitung Seite 9

Operation
1
Turn the handle of the pressure control
valve until there is sufficient pressure for
work such as spraying weeds (fixed
Handle of pressure control valve
STARTING
① When engine is started and
when pump starts suction.
HERBICIDE
STARTING
When low-
pressure spray
is required.
(Spray of weed
killer, etc.)
INSECTICIDE
Normal spraying work
2
After confirming proper pump and spray
operation in the machine, move the throttle
lever to high-speed position.
CAUTION
・When setting the pressure control valve handle
to "INSECTICIDE", "HERBICIDE" with throttle
fully open at the "HIGH PRESSURE" position of
pressure control valve handle, engine
revolutions increase as pressure decreases.
When using this machine at the "INSECTICIDE",
"HERBICIDE" position, use at a position little bit
back from full open throttle.
3
When opening ball cock, chemicals will be
sprayed from nozzle in a mist.
Stop
1
HIGH
PRESSURE
(fixed position)
① When high
pressure is
required in
particular.
② When this
machine is
set at a fixed
position and
2
longer hose
than
standard is
used.
3
8
Close ball cock.
Return throttle lever to low speed.
Push stop button to stop engine.
H
L
Stop button
Throttle lever
Push
English