Before Operation; Assembly Of Nozzle - maruyama MS0735W(CE) Bedienungsanleitung

Before operation

Assembly of nozzle

After confirming the packing is in place, securely tighten nozzle pipe to grip, and wide nozzle to nozzle
pipe. Tighten the screw securely after confirming the packing to make ensure there is no water leakage.
Over-tightening will cause extrusion or break the packing. Correct tightening pressure is important.
Discharge
The adjustment of knapsack strap
1. Tighten the strap
Pull the strap downward.
Assembly of waist stabilizer
Convex part
The concave section of knapsack frame and the
convex section of waist stabilizer are inserted
together.
English
Wide nozzle
End of spraying hose
2. Loosen the strap
Lift strap buckle upward to loosen.
Concave part
How to assemble
Nozzle pipe
Ball cock Spraying hose assembly
Nozzle holder
Nozzle holder is provided in the top of chemical
tank and side part
Pulling the adjuster lever releases the lock.
5
Grip
Nozzle holder
The adjustment of chest strap
Pull the chest strap to tighten.
Adjuster lever
How to disassemble