Time And Date Settings - PURE Evoke F3 Bedienungsanleitung

Time and date settings

The clock will automatically set itself using your digital radio signal, FM radio signal or your network. If the
time or date does not update automatically, you can manually set it using this option.
Note: Any time or date updates received by a digital broadcast will override manual settings.
Setting the time and date manually
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to select 'System
settings' > 'Time/Date'.
3. Turn and press the Select dial or use the <Select> buttons on the remote control to set the day of the
month. Repeat to set the month and year.
4. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Set
Time/Date'.
5. Turn and press the Select dial or use the <Select> buttons on the remote control to set the hour.
Repeat to adjust the minutes.
Note: If you have set your Evoke to use the 12 hour time format, make sure that you select the 'AM' or
'PM' version of the hour before pressing the Select dial or Select button on the remote control.
Time and date synchronization options
You can synchronize the time and date on Evoke using either the FM or digital radio signal or your internet
connection.
To specify the clock synchronization options:
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to select 'System
settings' > 'Time/Date'.
3. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Auto
update'.
4. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
between the 'Update from DAB', 'Update from FM', 'Update from network' and 'No update' clock
synchronization options.
Changing the time format
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to select 'System
settings' > 'Time/Date'.
3. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Set
format'.
4. Turn and press the Select dial or use the <Select> buttons on the remote control to choose between
'12' and '24'.
Setting the time zone
Press the Menu button to view the main menu.
1.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to select 'System
settings' > 'Time/Date'.
3. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Set
timezone'.
4. Turn and press the Select dial or use the <Select> buttons on the remote control to choose your
timezone.
EN
21