Backlight - PURE Evoke F3 Bedienungsanleitung

Backlight

You can adjust the duration that the screen is illuminated for and the brightness of the screen when Evoke
is switched on.
Timeout
To adjust the duration of the screen backlight before dimming:
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'System settings' > 'Backlight'.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Timeout'.
4. Turn and press the Select dial or use the <Select> buttons on the remote control to choose a
timeout setting. To specify that the backlight should always remain on, choose 'On'.
Power-on level
To specify the brightness of the screen when Evoke is switched on:
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'System settings' > 'Backlight'.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Power-on level'.
4. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
between 'High', 'Medium' or 'Low'.
EN
23