Fm Radio Settings - PURE Evoke F3 Bedienungsanleitung

FM radio settings

Note: You can only see the FM radio settings when you have selected 'FM' as the radio source.
FM stereo option
You can choose between stereo or mono reception when listening to FM radio. Mono may improve
clarity where stereo signals are weak.
To change between Stereo or Mono reception:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Audio Setting'.
3. To use mono reception, turn and press the Select dial or use the <Select> buttons on the remote
control to choose 'YES'. If you want to use stereo reception turn and press the Select dial or use
the <Select> buttons on the remote control to choose 'NO'.
FM scan
You can choose whether Evoke automatically stops at the next available FM station or the next available
FM station with a strong signal when scanning for an FM station. To change the FM scan setting:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Scan Setting'.
3. To automatically stop at the next available FM station with a strong signal, turn and press the Select
dial or use the <Select> buttons on the remote control to choose 'YES'. To automatically stop at
the next available FM station regardless of the signal strength, turn and press the Select dial or
use the <Select> buttons on the remote control to choose 'NO'
FM manual tune
You can set up Evoke so that you manually tune into an FM radio frequency in increments of 0.05 MHz.
To use FM manual tuning:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Manual tune'.
26