Options And Settings; System Settings; Setup Wizard - PURE Evoke F3 Bedienungsanleitung

Options and settings

Press the Menu button on Evoke or on the remote control to access the Settings menu.

System settings

Main menu
Bluetooth
Aux in
Sleep
Alarms
System settings
System Settings
Time/Date
Language
Factory reset
Software update

Setup wizard

Setup wizard
Start now?
YES NO
Setup wizard
1. Press the Menu button.
2. Turn and press the Select dial to select 'System settings' > 'Setup
Wizard'.
3. To run the setup wizard now, turn and press the Select dial to
select 'YES'. To set up Evoke later, turn and press the Select dial
to select 'NO'.
>
4. Turn and press the Select dial to choose the language that you
want to use.
5. Turn and press the Select dial to choose between a 12 or 24 hour
time format.
6. Turn and press the Select dial to select the method that you want
>
to use for updating Evoke's time. You can choose to update the
> time based on the 'DAB' or 'FM' radio signal or you can update
Evoke's time from your network. To disable automatic time
updates, choose 'No update'.
>
7. Turn and press the Select dial to choose the timezone that you're
located in.
8. If you want to enable daylight savings time, turn and press the
Select dial to choose 'YES'. If you want to disable daylight savings
time, turn and press the Select dial to choose 'NO'.
9. To set Evoke up so that you can use the Pure Select app to take
Evoke out of standby ('Keep network connected'), turn and press
the Select dial to choose 'YES'. If you want to disable this feature
to save power, turn and press the Select dial to choose 'NO'.
10. Turn and press the Select dial to select your region. Evoke will
search for available Wi-Fi networks.
11. Turn and press the Select dial to select the name (SSID) of your
Wi-Fi network. If your network requires a key, follow the next step.
If not skip to step 13.
12. Enter your network key or password by turning and pressing the
Select dial to highlight and select characters. If you want to delete
the last character, turn the Select dial to select 'BKSP' and push
to confirm.
13. Evoke will display a message to tell you that the Setup wizard has
completed. Press the Select dial to exit the Setup wizard.
Helpful hint: Your Wi-Fi key is case sensitive, make sure to enter it
exactly as shown.
EN
17