Wiring Connection - Kenwood KDC-U31R Bedienungsanleitung

Wiring connection

Antenna terminal
Light blue/yellow
(Steering remote control wire)
Blue/White
(Power control wire/ Antenna control wire)
Brown
(Mute control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
ISO connectors
Rear/subwoofer output
R L
If no connections are made, do not let the wire come out from the tab.
STEERING WHEEL
REMOTE INPUT
To the steering wheel remote control adapter
REMOTE CONT
ANT CONT
To the power control terminal when using the optional power amplifier, or to the antenna
control terminal in the vehicle.
P. CONT
To the terminal that is grounded when either the telephone rings or during conversation.
(To connect the Kenwood navigation system, consult your navigation manual.)
MUTE
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
Ignition wire
A7 (Red)
(Red)
Unit
Vehicle
Battery wire
A4 (Yellow)
(Yellow)
Default wiring
Fuse (10 A)
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
ª ·
B1 / B2 Purple / Purple/black : Rear speaker (right)
ª ·
B3 / B4 Gray / Gray/black : Front speaker (right)
ª ·
B5 / B6 White / White/black : Front speaker (left)
ª ·
B7 / B8 Green / Green/black : Rear speaker (left)
Part list for installation
A Faceplate
( ×1 )
B Mounting sleeve
( ×1 )
C Trim plate
( ×1 )
D Wiring harness
( ×1 )
E Extraction key
( ×2 )
ENGLISH | 13