Inhaltsverzeichnis
Werbung
Fixez la caméra de nouveau sur le pied.
Orientez la caméra au moyen des deux vis
d'ajustage (1 et 2) .
Connexion du boîtier de commande
• Connectez la caméra
au
boîtier
de
commande
au
moyen des câbles de
raccordement
(A/V
IN1 et A/V IN2)
• Connectez
le
connecteur Cinch au
moniteur
(jaune
=
signal vidéo, blanc =
signal audio)
• Enfoncez
le
connecteur Mini DIN
dans la douille A/V
OUT du boîtier de
commande.
38
Installation of Cameras
Although the camera is designed for outdoor installation and
operation, it should be installed in a protected area, for example,
under a carport.
The recommended installation height of the camera objective is
approx. 1.8 m.
The installation height depends on the object to be
observed.
Before the final installation it is recommended to connect
the camera and to look at the corresponding camera image
on the monitor/TV, to see whether the area to be monitored
is displayed.
Unscrew the adjusting screw(1) and use
the base as drilling template.
Make sure that there are no
electrical cables, water pipes,
etc. where you want to drill.
Screw on the baseplate with the screws
included in delivery.
If need be, use plugs.
Use a suitable screwdriver.
23
Werbung
Inhaltsverzeichnis
