Inhaltsverzeichnis
Werbung
Before doing cleaning or maintenance work at the
camera or a connected device, observe the follow-
ing safety instructions:
When opening covers or removing parts, you
might expose live parts.
Therefore, disconnect the device from all
voltage sources before you perform mainte-
nance work or repairs.
Capacitors inside the device might still carry
voltage even though you have disconnected
all voltage sources.
Never replace defective connecting cables
of mains units on your own. In such a case,
separate the device from the mains voltage
and bring it to a specialist's workshop.
Any repair work must be carried out by an
expert familiar with the involved dangers
and the relevant statutory requirements.
Disposal
Dispose of the unserviceable device according to the
relevant statutory requirements.
30
Functional Description
The b&w Camera is intended for monitoring purposes
for security technology, image telecommunications, in
entrance areas etc.
Via a built-in microphone, you can even hear the sound
for the recorded image of the area to be monitored.
The camera is equipped with a switch to switch on/off
the automatic exposure time. Via a further sliding
switch, you can switch on/off the back-light compensa-
tion.
Commissioning
To ensure proper commissioning of the
device, please read this operating manu-
al carefully before using the product!
Installation
Choose a place of installation where the camera is not
exposed to direct sunlight, vibrations, dust, heat, cold
and humidity. Do not install the product near devices
23
Werbung
Inhaltsverzeichnis
Fehlerbehebung
