Philips LTC 2009/61 Anleitung Seite 49

3. Now, install the unit (monitor, base tray, and 2 rack side
panels) into the rack. If necessary, use the four (4) supplied
10-32 screws and U-type nut fasteners.
U-Nut (4)
(Optional)
10-32 Screws (4)
(Monitor Shown
Installed in Rack Kit)
Figure 3 Installing Unit Into Rack
4.
19-inch EIA Rack
3
Install the cover bezel using the four (4) supplied 4-40
screws inserted into the holes in the rack side panels.
4-40 Screws (4)
Figure 4 Installing Cover Bezel