Beem Thermo2Go Bedienungsanleitung Seite 31

29
Problem
The coffee does not
taste very good.
The device switches
off during the
brewing process.
A large amount of
steam is produced
in the brewing
process.
During use, an
unpleasant smell is
detected.
The device does
not start the
brewing process at
the set timer time.
03510_DE-EN-FR-NL_A5_V1.indb 29 03510_DE-EN-FR-NL_A5_V1.indb 29
Possible cause
The device needs to be
cleaned.
The coffee powder has been
too fi nely or too coarsely
ground (in a coffee mill).
The coffee/water mixture is
not ideal.
The water quality is not good.
There is no longer any water in
the water tank.
Is the device scale-encrusted?
Is the device being used for
the fi rst time?
Has the device just been
descaled?
Has the power supply been
cut in between times?
Fix
Clean the device (see the
"Cleaning and Care" chapter).
Adjust the grinding fi neness of
the coffee (or have it adjusted)
if necessary or choose another
coffee powder.
Adjust the mixture to your own
individual taste.
Check the water quality and
fi lter the water if necessary.
Pour water into the water
tank (see the "Handling and
Operation" chapter | "Filling
the Water Tank").
Descale the device (see the
"Cleaning and Care" chapter |
"Descaling").
A smell often develops when
new devices are fi rst used.
The smell should disappear
once the device has been
used several times.
Rinse out the device with clear
water.
As soon as the power supply
is cut, all settings (time, timer)
are cancelled.
19.10.2017 09:52:24 19.10.2017 09:52:24
EN