Connection; Transmitter And Receiver - Renkforce 94 20 72 Bedienungsanleitung

Connection

The wireless transmission system can be connected to your devices via RCA connection, S-video connection or
component connection. The component connection provides the best image quality. The S-video connection still
provides better quality than the RCA connection.
The wireless transmission system is designed for use with low-level video and audio signals
only. Never connect high-level, high-energy signals, such as the loudspeaker output of an
amplifier. Check the operating instructions of the source devices before connecting them.
In case of doubt, consult an expert.
Non-compliance with these instructions may lead to damage to the wireless transmission
system or the connected devices.
If your devices do not provide the right connectors, use suitable adapters which are included
in our product line or are available at specialised shops.

Transmitter and Receiver


Depending on the type of connection, the inputs and outputs used on your AV device might have to be
activated. Please refer to the operating instructions of the respective devices.
With RCA connectors, pay attention to the colours of the sockets. Always connect sockets of the same
colour.
yellow = RCA video
white or black = left audio
red = right audio
green = component video Y
blue = component video Pb or Cb
red = component video Pr or Cr
29