Siemens HKW-600 Bedienungsanleitung Seite 8

6 Car Kit Bluetooth (en)
There is a wiring diagram and
further information on the
phone-in adapter cable on the
Siemens website:
www.siemens-mobile.com/
phoneinadapter
Radio Muting*
Please refer to the car radio manufac-
turer's instructions.
The radio signal can be switched
automatically to mute during
phone calls. Connect the radio
mute control line
input of the car radio.
Electronics box
Please make sure that the electronics
1
box is not mounted on or between
metal objects. Only then can good ra-
dio communication be ensured.
Make sure that the electronics box
is securely mounted.
Ensure that the ventilation slots on the
electronics box
least 2 cm space) and the installation
does not cause interference with any
other devices.
* For vehicles with car radios with
mute connections. The car radio is
not included in the Siemens
standard scope of supply.
to the mute
§A§
1
are not covered (at
Do not place the connector cable be-
hind the electronics box
around the electronics box
may lead to interference.
Insulate any unused cable ends with
insulating tape.
Feed the lines for the following
components carefully to the
electronics box
aging them and then connect
them with the electronics
1
box
• Wiring loom
• Display
• External microphone
• Mobile holder cable (optional)
1
1
without dam-
:
3
,
6
,
1
or wrap it
1
as this
:
,