Control Keys - Sygonix 1397543 Bedienungsanleitung

b) Installation of the foot
2.
c) Wall installation
When drilling or tightening screws, make sure not to damage any
cables, wires or pipes located underneath the surface.
When installing the product in a bathroom, keep a distance of at least
60 cm to the bathtub or shower.
Keep a distance of at least 30 cm to the floor.
Do not install any objects (e.g. shelves or cabinets) directly above the
product. Allow for a clearance of at least 100 cm on top of the product.
1. Loosen the screw on the bottom of the product.
2. Use this screw to attach the bottom wall mount to the product.
2.
1.
1.
2.
3.
A
3. Mark the positions for the two upper drill holes onto the wall. Drill
the holes in the wall and insert the dowels.
Item no. 1307543: A = 40 cm, B = min. 80 cm
Item no. 1307544: A = 15 cm, B = min. 100 cm
4. Attach the top wall mounts to the wall using one screw each.
5. 6.
5. Install the product to the top wall mounts. Mark the position of the
drill hole through the bottom wall mount onto the wall.
6. Remove the product from the top wall mounts. Drill the hole into the
wall and then insert the dowel.
7. Install the product again to the top wall mounts. Attach the bottom
wall mount to the wall using one screw.

Control keys

Key Function
Increase the temperature
Reduce the temperature
Setting the timer
Press and hold the button to activate the flashlight at the front
of the remote control.
4.
B
7.