Operating instructions
Fan heater 2000 W L shape
Item no. 1397543
Wide (wide/horizontal)
Item no. 1397544
High (high/vertical)
Intended use
The product is designed to heat indoor spaces. The product features a
remote control with built-in LED flashlight, a timer with 4 timer settings,
and anti-frost, over-tilt and overheat protection mechanisms. The product
can be installed on floors or be mounted to suitable walls.
Power is supplied via a normal household power outlet.
The product is splash proof according to IP24 and is therefore suitable for
use in bathrooms or laundries. Nevertheless, the product is not suitable
for use outdoors.
For safety and approval purposes (CE), you must not rebuild and/or
modify this product. If you use the product for purposes other than those
described above, the product may be damaged. In addition, improper use
can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them. Make this product available to
third parties only together with its operating instructions.
This product complies with the statutory national and European
requirements. All company names and product names are trademarks of
their respective owners. All rights reserved.
Up-to-date Operating instructions:
1. Open www.conrad.com/downloads in a browser or scan
the displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the query
you can download displayed records.
Delivery content
• Fan heater
• Remote control
• Stand
• Bottom wall mount
• 2 x upper wall mount
• 2 x screw for stand
• 2 x screw for upper wall mount
• Screw for bottom wall mount
• 3 x dowel for wall mount
• Operating instructions
Description of symbols
The lightning symbol is used, if there is the risk of fatal electric
shock.
This symbol informs you about specific risks when handling,
operating or using the product.
The "arrow" symbol indicates special tips and operating information.
This symbol indicates that the product must not be covered.
Safety instructions
Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this manual, we assume no
liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
CAUTION: Do not cover.
Never cover the product during or shortly
after use (such as with clothes, a blanket,
curtains, etc.) to prevent it from overheating.
This also poses a fire hazard!
• This device is not intended to be used by
persons (including children) with reduced
physical, sensory or mental abilities or lack
of experience and / or lack of knowledge
unless they are supervised by a person
responsible for their safety or have received
instructions on how to use the device.
• Children should be supervised to ensure
that they do not play with the device.
• This product is not a toy, keep it out of the reach of children. Use
extreme caution when children are present. Children do not realize
the dangers which can arise from incorrect handling of electrical
devices. Children may attempt to insert objects into the device.
There is a risk of lethal electric shock! The hot surfaces also pose
a great risk of injury and fire hazard! Set up the product out of the
reach of children.
• Do not leave packaging material lying around carelessly. These
may become dangerous playing material for children.
• Never operate the product without the safety guard and do not
insert any objects into the safety guard. This poses a risk of fatal
injury due to electric shock and fire hazard!
• Make sure there is enough space between the device and other
objects during use to guarantee sufficient air circulation.
• Never use the product in the direct vicinity of a bathtub, a shower
or a swimming pool.
• Install the product in such a way, that a person standing in the
shower or sitting in the bathtub cannot touch the product.
• Never place the product directly beneath a wall power outlet.
• Do not use the product with a separate timer, an external remote
control system or any other device to automatically turn on the
product.
• Do not use the product in your car or in other mobile things or
spaces.
• The device was constructed according to protection class I. Only
a proper mains socket (230 V/AC, 50 Hz) of the public supply net
must be used as voltage source.
• The mains outlet must be located near to the device and be easily
accessible.
• Never pull the mains plug from the socket by pulling at the cable.
Always pull it from the mains socket using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the
device for an extended period of time.
• For safety reasons, always unplug the device in case of a
thunderstorm.