Care And Cleaning; Technical Data - Renkforce 1687476 Gebrauchsanweisung

b) Verifying Installed Driver
Once you finish the installation, you can verify if the network adapter is properly
installed.
Operating Driver Verification
System
Windows • Open Device Manager.
• Go to Network adapters.
• Look for Realtek USB Family Controller. If you see "Realtek
USB Family Controller" (or similar) the adapter was installed
correctly.
Mac OS • On the menu bar, select GO, then scroll down to Utilities .
• Select System Information.
• Under Hardware, select USB.
• Look for Realtek USB Family Controller. If you see "Realtek
USB Family Controller" (or similar) the adapter was installed
correctly.
c) Hardware Connection
• Connect a network cable to the device Network port (6).
• Connect the other end of the cable to your network hub, switch or router.
• The Network link LED (4) should light up to indicate a physical connection between
the adapter and the network has been made.
• The Network activity LED (5) will light up while data is being transferred.
If the Network link LED does not light up, please check the cable
connections between all the network devices.

Care and Cleaning

• Disconnect the product from your computer and power supply and remove all
peripherals before each cleaning.
• If it is hot, wait for it to cool down.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of
the environment.

Technical Data

Operating voltage ................... 5 V/DC (via USB-C™), 900 mA
Transfer rates ......................... Max. 5 Gbps
Downstream ports .................. 3 x USB Type A
Ethernet .................................. 10/100/1000 Mbps auto-sensing capability .IEEE
802.3, 802.3u, and 802.3ab (10Base-T, 100Base-
TX, and 1000Base-T) max. 9kB packet size
Compatibility ........................... USB 2.0 / USB 1.1
Operating conditions ............... 10 to 40 °C, 10 – 90 % relative humidity (non-
condensing)
Storage conditions .................. 1-10 to 70 °C, 10 – 90 % relative humidity (non-
condensing)
Dimensions (L x W x H) .......... 112 x 35 x 19 mm
Cable length ........................... 24 cm (w/o plug)
Weight .................................... 64 g
System Requirements
Windows , Mac, Linux
®
Power Adaptor (Not Included)
Output voltage/current ............ 5 V/DC, 4000 mA
Plug diameter ......................... 11.35 mm (inner) / 3.5 mm (outer), length: 9 mm,
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1687476_v1_0618_fl01_02_m_4L_(1)