Operation - Renkforce 1687476 Gebrauchsanweisung

Operating Instructions
USB 3.1 USB-C™ Gigabit Network Adapter
+ 3 Port USB Hub
Item No. 1687476
Intended Use
This device combines a 3-Port USB 3.1 (Gen 1) hub running up to super speeds
of 5 Gbps, with an Ethernet network adaptor (RJ45 port). It is connected to your
computer via a USB Type-C plug.
TM
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g.
in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product
may be damaged. In addition, improper use can result in short circuits, fires, or other
hazards. Read the instructions carefully and store them in a safe place. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery Content
• Hub
• Driver installation CD
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/
downloads or scan the QR code shown. Follow the instructions on
the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate
important information in these operating instructions. Always read this
information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this manual, we assume no liability
for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may
become dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Consult an expert when in doubt about the operation, safety or connection
of the appliance.
• Maintenance, modifications and repairs must only be completed by a
technician or an authorised repair centre.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating Elements
1 2
Super Speed 3. 1 Gen 1 Com bo

Operation

This hub is suitable for charging and synchronizing mobile devices.
Devices with high current demands (e.g. tablets) might not charge.
• Connect the USB-C™ plug (1) to an available USB-C™ port on your computer.
• Connect a device to an available USB type A port (3), or Network port (6).
a) Power Usage
• Without a power adaptor (sold separately), the hub functions in "Bus-
Powered-Mode". This means that the current supplied by the computer
will be divided by the number of ports being used.
• In Bus-powered mode, make sure that the combined current of all
connected devices does not exceed 900 mA.
• Devices with high startup currents (e.g. external hard disks) may cause
the combined current to exceed 900 mA during startup. Use a power
adapter in such cases.
• This hub is not meant to serve as a stand-alone charger. It is not
compatible with iPads or any other devices with irregular charging
requirements.
b) Power Adaptor (Not Included)
• If a power adaptor is connected, all USB 3.1 ports can supply a maximum current
of 900 mA.
• Connect the adaptor to the 5 V/DC power input (2).
Network Adaptor
• Some computers do not feature network ports (RJ45) any longer. The Network
port (6) allows you to connect your computer to a Local Area Network (LAN) and to
the Internet via router/modem.
• The adaptor supports wake-on-LAN, which allows you to wake your computer
remotely.
• You are suggested to use a CAT5e (or higher) twisted pair network cable for
optimal network performance.
• There is no need for cross-over cables.
Do not connect the network cable the Network port (6) before installing the
included driver CD. See section "Driver Installation" for more information.
a) Driver Installation
• Insert the driver CD into the DVD drive on your computer.
• Locate then select the relevant installation file.
• Follow the on-screen prompts to complete the installation process.
1 USB-C™ plug
2 5 V/DC power input
3 USB type A ports
3 4 5 6
4 Network link LED
5 Network activity LED
6 Network port (RJ45)