Conrad 75 42 63 Bedienungsanleitung Seite 79

The pictures of the connected surveillance cameras are displayed for 15 seconds each alternatingly in
"SCAN" mode.
Confirm your input by pushing the "MENU" button (5).
Push the "ESC" button (8) to save the settings and leave the menu.
☞
Activation and deactivation of cameras in the "CAMERA SETUP" (surveillance camera
setup, see chapter 10b) determines the channels for which pictures are shown on the
screen in idle mode.
An audio channel is available in QUAD mode (by default, channel 1 or the next available
channel with a connected and coupled surveillance camera (pairing) is pre-set), in single
channel full-screen mode or "MOTION" mode (motion detection).
The audio channel remains connected until the channel is switched.
If 5/10/15 second intervals are set for "MULTI CHANNELS IDLE DISPLAY", use the arrows
(4),
the main menu to activate this display mode.
(6), (3) and (7) to select the option "SCAN ACTIVATED CAMERAS"in
79