Tv Output'äù (Tv-Output: Ntsc/Pal) - Conrad 75 42 63 Bedienungsanleitung

"TV OUTPUT (TV-Output: NTSC/PAL)
☞
Use the included A/V cable to connect the system to a screen or TV if required. Observe the
notes in section 7e ("Installation/Cable Connections").
Push the "MENU" button (5) and select the menu item "SYSTEM SETUP" (upper right) in the main menu
with the arrows
selection.
Use the arrows (3) and
screen and push the "MENU" button (5).
Use the arrows (4),
ton (5) to confirm your input.
Push the "ESC" button (8) to save the settings and leave the menu.
☞
Switching the TV system may change the screen display.
74
(4), (6), (3) and
(7) to select "TV OUTPUT" in the selection menu at the left edge of the
(6) to select NTSC or PAL, depending on system, and push the "MENU" but-
(7). Push the "MENU" button (5) again to confirm your