G) Pan Tilt Zoom" (Pan, Tilt Or Zoom The Picture Section Displayed On - Conrad 75 42 63 Bedienungsanleitung

g) PAN TILT ZOOM" (pan, tilt or zoom the picture section displayed on

the screen)
Pus the "MENU" button (5) and use the arrows
select the function "PAN TILT ZOOM" and push the "MENU" button (5) again to get to the submenu "PAN
TILT ZOOM".
☞
The surveillance camera as such cannot be panned. The function "PAN TILT ZOOM" only
changes the picture section displayed on the indoor unit.
Push the "MENU" button (5) again in "PAN TILT ZOOM" mode to activate the second zoom stage for the
picture of the selected monitoring camera. Push the arrows
tedly to then adjust the displayed section to the left, right, up or down in small steps.
Push the "MENU" (5) button again to zoom out again.
In zoom level 1, use the arrows
channels.
Push the "ESC" button (8) to terminate the "ZOOM" mode.
82
(4),
(3) and (7) to switch between the individual surveillance camera
(6), (3) and (7) in the main menu to
(4), (6), (3) and (7) repea-