Getting Started - Asus WL-330N Kurzanleitung

Getting started

NOTE: For Wireless Router mode, start from step 1. For other operation
modes, start from step 2.
1. Unplug and disconnect the wires/cables from your existing modem setup.
a: Unplug the AC adapter from the power outlet and disconnect it from your
cable/ADSL modem.
b: Disconnect the network cable from your cable/ADSL modem.
2. Connect and turn on your wireless router.
a: Using a network cable, connect your computer to the wireless router's LAN port.
b: To power the wireless router, use its power adapter or its micro USB power cord.
3. Log into the wireless router's web graphics user interface (web GUI).
a: Ensure that the wireless LED is blinking.
b: In your web browser, key in 192.168.1.1. Key in admin as the default user-
name and password.
c: From the web GUI, select the operation mode and configure its settings for
your wireless network setup.
NOTES:
• For more details. refer to the user manual included in the support CD.
If the web GUI does not launch, refer to the Troubleshooting section.
•
4
a
b
Wireless LED