Setup - Renkforce E-SA9 Bedienungsanleitung

6. Setup

When selecting the installation site, consider the room conditions, meaning the location of the next outlet,
etc. Also prevent direct sunlight, vibrations, dust, heat, cold and dampness. Keep the appliance away from
strong transformers or motors.
Place the amplifier on a stable, horizontal surface. There must be enough space around the
system for air circulation to permit dissipation of the generated heat. Therefore, only place the
amplifier on a level surface and not on carpets, etc. Do not cover up the ventilation slots in the
casing.
If you do not heed these instructions, the device may be damaged.
Do not drill extra holes or screw any extra screws for mounting purposes into the case. This
will damage the device.
Because of the variety of used lacquers and polishes for furniture, the device base might leave
residues on furniture due to a chemical reaction. That's why do not place the device without
appropriate protection on the valuable furniture surfaces.
28