Renkforce E-SA9 Bedienungsanleitung Seite 26

(1) Mains switch POWER
The amplifier is switched on or off using this switch.
When the switch is depressed, the device is on. If the switch is not depressed (position OFF), the device
is turned off.
(2) Operating display
This LED will light up when the device is switched on.
(3) Surround switch
By pressing this switch, you activate the SURROUND output on the back of the device.
(4) BALANCE control
With this control, you adjust the volume balance between the left and the right loudspeaker channel.
In the central position, playback takes place at the same volume via both loudspeakers.
Turning clockwise reduces the volume of the left loudspeaker. Turning counter-clockwise reduces the
volume of the right loudspeaker.
(5) VOLUME control
Using this control, you can set the volume.
Turning this control clockwise increases the volume. Turning counter-clockwise reduces the volume.
(6) Bass control (BASS)
With the bass control, you influence the intensity of bass playback.
Bass playback is amplified when turning the control clockwise. Bass playback is dampened when turning
the control counter-clockwise.
(7) Treble control (TREBLE)
With the treble control, you influence the intensity of treble playback.
Treble playback is amplified when turning the control clockwise. Treble playback is dampened when tur-
ning the control counter-clockwise.
(8) Input selection switch
With this switch, you select the input (signal source). You can choose between the inputs CD, TUNER and
AUX.
(9) Cinch input AUX
This is where you connect the cinch output sockets of a cassette recorder, video recorder, satellite recei-
ver, etc.
26