Renkforce E-SA9 Bedienungsanleitung Seite 27

(10) Cinch input TUNER
Here is where you connect the cinch output sockets of the radio device.
(11) Cinch input CD
Here is where you connect the cinch output sockets of the CD player.
(12) Effect loudspeaker output SURROUND
A mono loudspeaker signal is applied to this effect output when pressing the SURROUND switch (3). Here
you can connect additional passive loudspeakers. These loudspeakers can be used as rear loudspeakers
to achieve a better spatial playback effect.
The inner contact of the cinch socket is the positive, the outer contact the negative loudspeaker connec-
tion.
(13) Loudspeaker output SPEAKER
Connect the loudspeakers to these clamps.
(14) Mains connection
The mains cable is plugged in here.
(15) Fuse holder
Contains the amplifier's fuse.
To change the fuse, pull the mains plug out of the mains outlet and open the fuse holder with a Phillips
screwdriver.
27