Operating Voltage Connection (12-16V/Dc); Door Bell Button Connection - Renkforce 752168 Bedienungsanleitung

7.4 Operating voltage connection
The operating voltage (12 - 16 V/DC) is connected to the terminal clamps
7 (-) and 8 (+).
12VDC/500MA
MIN. POWER
ADAPTOR
1 2 3
Activate the operational voltage only after completing all connec-
tions.

7.5 Door bell button connection

The terminal clamps 9 and 10 are intended for connection to a door bell button.
The connection is suitable for a button with N.O. (normally open) contact.
1 2 3
The door bell is ready for operation around the clock if the alarm system is pro-
perly supplied with voltage.
12V
OR
BATTERY
+
4 5 6 7
DOOR BELL
BUTTON(S)
4 5 6 7
+
8 9 10 11
N.O.
8 9 10 11
12
12
39