Renkforce 752168 Bedienungsanleitung Seite 44

Jumper 3 (determine mode for relay output)
1 2
C
1 2
C
44
The relay
contact
remains
closed
The relay
contact
remains
about
3 minutes
After an alarm case, the relay contact re-
mains permanently closed until the alarm
is reset (for this, the mode selection switch
at the front must be set to "OFF").
12 V/DC are applied to the connection ter-
minals 6 and 7.
After an alarm case, the relay contact
remains closed about 3 minutes until the
alarm is reset (for this, the mode selection
switch at the front must be set to "OFF").
12 V/DC are applied to the connection ter-
minals 6 and 7.