Proper Use; Operation; Cleaning And Care - Sanitas SHK 18 Gebrauchsanleitung

• This heating pad must be checked frequently for signs of wear or damage. If such signs are
present, or if the cables are damaged, or if this heating pad has been used incorrectly, it
must be taken to either the manufacturer or the dealer before further use.
• Repairs may only be carried out by specially trained personnel or at an authorised repair
workshop, as special tools are required. Incorrect repairs may cause considerable danger to
the user.
• Should you still have questions on using our appliances, please contact our customer service.

2. Proper use

This heating pad is designed for warming the human body. It allows you to apply tar geted
warmth. Heat promotes the circulation and relaxes the muscles. This heating pad is not in-
tended for use in hospitals or for commercial applications. In particular, it may not be used on
infants, small children, persons insensitive to heat, helpless persons or animals.
To avoid soiling or damaging the heating pad, we recommend using a fabric cover, particularly
when applying essential oils and ointments.
When used for the first time, the heating pad may start to smell of plastic but this will soon go
away.

3. Operation

3.1 safety
This heating pad has a SAFETY SYSTEM. This electronic sensor technology prevents the
entire surface of the heating pad from overheating by automatically switching off in the event
of a fault. If the safety system switches off the heating pad automatically as a result of a fault,
the temperature display on the switch is no longer illuminated even when the heating pad is
switched on. Please note that, after a fault has occurred, the back and neck heating pad can
no longer be used for safety reasons and must be sent to the service address indicated.
3.2 selecting temperature
The fastest way to heat up the heating pad is to first set the switch to the highest setting. It can
then be turned down again as required.
After switching on the heating pad the display of the selected temperature will flash briefly then re-
main steady. We recommend the lowest temperature setting for extended use of the heating pad.
3.3 temperature settings
Level: 0 = Off
1 = Minimum heat
2 = Medium heat
3 = Maximum heat
3.4 Automatic switch-off function
The heating pad switches off automatically after approx. 90 minutes. The illumina-
ted temperature setting display then starts to flash. To switch on the heating pad
again, first set to ‚0' and then after approximately 5 seconds select the desired
temperature setting. Switch off the heating pad (0) or pull the plug out of the mains
socket if you are not going to use the heating pad after the automatic switch-off.

4. cleaning and care

• Before cleaning the heating pad, always unplug it from the mains.
• The textile cover can be cleaned according to the symbols on the label, and for this purpose
must first be removed.
7
90
min
STOP