C) Mounting/Installing The Indoor Sensor; Battery Replacement - Conrad ASH888I Bedienungsanleitung

c) Mounting/Installing the indoor sensor

The sensor can be used via the suspension eye "A" as wall device or can
be placed at the location of use.
When drilling or tightening screws, be careful not to damage
any power supply lines, gas or water pipes, as there may be
life-threatening danger involved!

9. Battery Replacement

The batteries in the indoor sensor have a life span of up to 3 years (high
quality alkaline batteries).
They must be replaced when in the display of the corresponding display
device the battery symbol for the sensor appears.
Change the batteries as described in chapter 8. a). After a battery change
the sensor is ready for use.
25