Putting-Into-Operation; Inserting The Batteries; B) Registering The Indoor Sensor - Conrad ASH888I Bedienungsanleitung

8. Putting-into-operation

a) Inserting the batteries
• Remove the cover of the battery compartment on the rear side of the
indoor sensor.
+
-
• Insert two batteries type Mignon/AA observing the marking specific to
polarity (see drawing) in the battery compartment.
• Close the battery compartment.

b) Registering the indoor sensor

• After selecting the desired display location of the sensor according to
your operating manual, shift the receiving station in the receiving mode
• Press carefully with a pointed object (e.g. a toothpick) the button "B" on
the indoor sensor. This registers the indoor sensor at the receiving
station.
24
A
-
+
B