Troubleshooting - Beper 50.939 Betriebsanleitung

Steam Generator Use instructions
After ironing
1. Put the iron on the stand.
2. Switch the appliance off.
3. Remove the mains plug from the wall socket and let the iron cool down.
Features
Vertical steaming
Never direct the steam at people.
● You can steam iron hanging curtains and clothes (jackets, suits, coats) by holding the iron in ver-
tical position and pressing the steam activator.
Cleaning and maintenance
After each use
Never immerse the iron in water nor rinse it under the tap.
1. Clean the iron with a damp cloth.
2. Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive clea-
ning agent.
Storage
Always let the iron cool down before storing it.
1 Empty the water tank and store the supply hose and the mains cord.
2 There are handgrips on the either side of the steam tank for easy transport.

Troubleshooting

Please check the followings before repair.
Problem
The appliance does not beco-
me hot
Possible causes
There is connection problem
The power on/off switch has
not been switched on.
The temperature dial has
been set to MIN
14
Solutions
Check the mains cord, the plug
and the wall socket.
Set the on/off switch to "on"
Set the temperature dial to the
required ironing temperature