Schego schegoLUX light Bedienungsanleitung Seite 17

schegolux.book Seite 17 Dienstag, 29. Juni 2010 6:05 18
Replace the illuminant
ATTENTION:
Direct contact with your fingers can damage the illuminant. Use a soft cloth to touch
the illuminant.
1. Make sure that the halogen lamp has cooled down and dried completely.
2. Carefully pull the reflector off the halogen lamp (Fig. 3/A).
3. Unscrew the illuminant cover off the halogen lamp (Fig. 3/B).
4. Pull the defective illuminant out of the socket (Fig. 5).
5. Carefully insert the new illuminant into the socket (Fig. 5).
Faults
Before submitting claims for damage to the halogen lamp you should first try to rectify
the fault yourself by following this table.
Malfunction
The halogen lamp does not
light
Disposal
Once the usage period comes to an end you must dispose of the halogen lamp
and all accessories in compliance with valid environmental regulations. Electric
waste must not be disposed of together with domestic refuse.
Warranty
For the equipment sold by us we grant a 24 months warranty, starting with the date of
purchase (receipt). Within the warranty period we will rectify faults on equipment or
accessories*), which are caused by material or manufacturing faults, free of charge by
means of repair or, at our discretion, replacement.
Warranty adjustments do neither constitute an extension of the warranty period, nor do
they start a new warranty! The purchasing receipt serves as proof for warranty. Without
this proof a replacement or repair free of charge is not possible.
*) Both defects on consumables or wear items, as well as cleaning, maintenance or the
replacement of wear items are not covered under warranty and can thus only be
provided against payment!
Replace the illuminant
Cause Remedy
Illuminant defective Replace the illuminant
Pug connection to Check plug connection
transformer interrupted
Transformer defective Replace the transformer
17