Microusb Interface; Technical Data; Mobile Terminal - Acd M266 Kurzübersicht

16.5

microUSB interface

The device is equipped with a microUSB interface for service purposes (ActiveSync).

The housing must be opened in order to access the microSD
interface. This may only be performed by trained service staff!
NOTE
Fig. 18: Internal microUSB interface

17 Technical Data

17.1

Mobile terminal

The M266 mobile terminal technical data is contained in the table below.
Housing
Protection class
Operating
temperature
Storage temperature
Relative humidity
Dimensions
Weight
Power supply
Display/screen
Touchscreen
Keyboard/buttons
Barcode scanner
Processor
Memory
Operating system
Interfaces
Optional
On request
Accessories
M266_Set_Kurzübersicht_Brief Overview_V1.70_de_en
ABS
IP65
0 °C to 45 °C/32 °F to 113 °F
Short-time operation down to temperatures of -20 °C in cold storage
chambers is permissible. You should allow the device to run for 20
minutes prior to this. Condensation on the device must be avoided.
-20 °C to 70 °C/-4 °F to 158 °F
5 % – 90 %, not condensing
Approx. 224 x 92 x 36/157 mm (L x B x H)
Approx. 600 g
7.2 V/Li-Ion change rechargeable battery, 3400 mAh
3.5" TFT colour screen with LED backlight,
240 x 320 pixels, 640 cd/m
1 status LED
Resistive touch, surface hardness at least 3H
Washable membrane keyboard,
21 keys incl. 6 function keys
1D-scanner integrated in the housing (scanner button inside grip)
Marvell XScale processor PXA166, 800 MHz
512 MB flash, 256 MB RAM, 1 GB microSD flash card,
larger memory available as an option via µSD card
Windows Embedded CE6.0
SDIO WLAN radio card according to IEEE 802.11a/b/g/n
µSD-Card (intern, 1 GB plugged)
USB-Slave (intern)
integrated speaker for system messages
2D scanner
Ivanti/Wavelink Products
UMTS, GPS,
BT-compatible close-range network
Docking station DS266
2
27 / 29