Inserting And Removing The Mobile Terminal Into/From The Docking Station; Docking Station; Power Supply Unit - Acd M266 Kurzübersicht

15.1.7 Inserting and removing the mobile terminal into/from the docking station

Push the mobile terminal straight down when inserting it into the docking station. Pull the mobile terminal
straight up when removing it from the docking station.
Fig. 14: Inserting and removing the mobile terminal into/from the docking station
The charging contacts are very sensitive! The mobile terminal may
only be inserted into and removed from the docking station as
described above. Do not touch the contacts with your fingers or
any objects such as ballpoint pens, screwdrivers, etc.
ATTENTION
15.2

Docking station

15.2.1 Power supply unit

The M266 may only be charged in the DS266 docking station with the corresponding power supply unit.
 External Power Supply with euro plug (CEE 7/16 plug) for all European countries except Ireland, UK etc.
 Input voltage
~
 Output voltage
 External Power Supply with US Power Cord or UK Power Cord or Schuko Power Cord (CEE 7/7 plug)
 Input voltage
~
 Output voltage
M266_Set_Kurzübersicht_Brief Overview_V1.70_de_en
100 – 240 V AC; 50 – 60 Hz
12 V DC; 1.6 A
100 – 240 V AC; 50 – 60 Hz
15 V DC; 2.4 A
23 / 29