Functional Description - Bosch GSA 18 VE PROFESSIONAL Bedienungsanleitung

OBJ_BUCH-257-001.book Page 15 Thursday, November 30, 2006 3:06 PM
Keep your workplace clean. Blends of materi-
als are particularly dangerous. Dust from light
alloys can burn or explode.
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control over
the power tool.
Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before
inserting battery pack. Carrying the power tool
with your finger on the On/Off switch or inserting
the battery pack into power tools that have the
switch on invites accidents.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradia-
tion and fire. There is danger of explosion.

Functional Description

Read all safety warnings and all
instructions.
warnings and instructions may result in
electric shock, fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
Intended Use
The machine is intended for sawing wood, plastic,
metal and building materials while resting firmly on the
workpiece. It is suitable for straight and curved cuts.
When using the appropriate bimetal saw blades, it is
possible to cut flush to the workpiece surface. The
saw blade recommendations must be observed.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Saw blade*
2 Adjustable footplate
3 Saw blade holder
4 Locking sleeve for saw blade
5 Stroke rod
6 On/Off switch
7 Soft grip
8 Battery unlocking button
9 Battery*
10 Utility hook
*The accessories illustrated or described are not
included as standard delivery.
2 609 932 557 • 30.11.06
Noise/Vibration Information
Measured
EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 90 dB(A); sound power level
101 dB(A). Uncertainty K=1.5 dB.
Wear hearing protection!
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 60745:
Sawing
a =19 m/s
h
measured in accordance with a standardised test
given in EN 60745 and may be used to compare one
tool with another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information
sheet. This could lead to a significant underestimate
of exposure when the tool is used regularly in such a
way.
Note: To be accurate, an estimation of the level of
Failure to follow the
exposure to vibration experienced during a given
period of work should also take into account the times
when the tool is switched off and when it is running
but not actually doing the job. This may significantly
reduce the exposure level over the total working
period.
Technical Data
Sabre saw
Article number
Rated voltage
Stroke rate at no load n
Tool holder
Stroke rate control
Stroke
Weight according to
EPTA-Procedure
01/2003
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
values determined
of wood: Vibrational
2
, uncertainty K=1 m/s
The vibration emission level given in
WARNING
this information sheet has been
V=
spm
0
mm
kg
according to
emission value
2
.
GSA 18 VE
PROFESSIONAL
3 601 F4G 0..
18
0–2300
SDS
25
3.9
English | 15