Velleman WTPC108 Bedienungsanleitung Seite 4

4. Features
• wall clock made of pure light
• classic analogue face
• fully-animated sweeping second hand
• desktop or ceiling mount
• low voltage, low power consumption
• 40,000 hours LED life
• projection light (LED) powered via adaptor (incl.)
• adjustable lens
5. Overview
Refer to the illustration on page 2 of this manual
projection clock
A DC power input
B ceiling mounting hole
C lens
D power on/off switch
E magnetic stand
6. Use
• Choose a location for the projector clock. Make sure the surface of
projection is smooth. The clock can be placed on a desk top using the
magnetic stand [E] or ceiling mounted using the included mounting
bracket.
• When using the mounting bracket, first attach the bracket to the ceiling
with two screws. Keep in mind that once mounted, the projection angle
can only be adjusted up or down, not left or right.
• Screw the lock nut [I] on the screw thread [J] if this is not the case
yet.
• Remove the plastic cap from the ceiling mounting hole [B] and screw
the device on the mounting brackets' screw thread [J] counter clockwise
until stop, then turn back to the desired projection direction. Screw the
lock nut [I] clockwise until the device is secured tightly.
• Open the back cover [G] by pressing on the back cover release button
[F] while pushing the back cover [G] downward. Verify whether a battery
is present in the battery compartment (see §7 battery replacement).
• Connect the DC-plug of the included adaptor into the DC power input [A]
and plug the adaptor itself into the mains.
00 (17/11/2008)
WTPC108
F back cover release button
G back cover
H time set rotary knob
I lock nut
J screw thread
K ceiling mounting bracket
4
®
Velleman