Inserting/Replacing The Battery - METRADO Gluceofine Pro Benutzerhandbuch

Battery
Your Gluceofine® Pro meter comes with one 1.5V AAA size alkaline battery.

Inserting/Replacing the Battery

To replace the battery, please make sure that the meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old battery and replace it with one 1,.V AAA size alkaline
battery.
3. Close the battery cover. If the battery is inserted correctly, you will hear
a "beep" afterwards.
Low Battery Signal
The meter will display one of the messages below to alert you when the meter
power is getting low:
1. The " " appears in display:
The meter is functional and the result remains accurate, but it is time to
change the battery.
2. The " " appears with "E-b", "Error" and "low":
The power is not enough to do a test. Please change the battery
immediately.
26