Setting The Meter - METRADO Gluceofine Pro Benutzerhandbuch

Setting the Meter

Before using your meter for the first time or if you change the meter battery,
you should update and check your individual settings. After inserting the
battery (see page 26) please take the following steps and check if your
individual settings are saved.
1. Setting the date
The sequence of the date setting is: YEAR —> MONTH —> DAY.
When entering the setting mode the year number is flashing. Press
to select the correct year. Press M to confirm.
or
Afterwards the month number is flashing. Press
correct month. Press M to confirm.
Afterwards the date of day is flashing. Press
correct date. Press M to confirm.
2. Setting the time format
Press or
confirm.
Entering the Setting Mode
Start with the meter off (no test strip inserted).
If necessary push and hold button M for 3
seconds. Press and hold
time to enter the setting mode.
to select the desired time format (12h or 24h). Press M to
and at the same
or to select the
or to select the
11