Reviewing Test Results In Memory - METRADO Gluceofine Pro Benutzerhandbuch

Reviewing Test Results in Memory

The meter stores the 1000 most recent blood glucose test results along with
respective dates and times in its memory. To enter the meter memory, start
with the meter switched off. If necessary please switch off the meter by
holding the M button for 3 seconds.
Reviewing Single Test Results
1. With the meter switched off press and release M or
" " will appear on the display and the first reading you see is the last
blood glucose result along with date, time and the measuring mode.
2. Press or
Press and hold M to switch off the meter.
Reviewing Average Test Results
1. With the meter switched off press and release
mode for average results. Your 7-day average result measured in "Gen"
measuring mode will appear on the display.
2. Press to review 14-, 21-, 28-, 60- and 90- day average results stored in
each measuring mode in the order of "Gen" (general), AC (before meal),
then PC (after meal). Press and hold M to switch off the meter.
to recall the test results stored in the meter.
.
to enter memory
23