Grundig HS 4023 Bedienungsanleitung Seite 13

OPERATION
Operation
Check if the mains voltage on the type plate
(on the handle of the appliance) corresponds to
your local mains supply.
1 Towel dry your hair thoroughly after washing.
2 Plug the power cord
3 Turn on the appliance with the switch
set the temperature/blower level.
4
If required you can interrupt the hot air sup-
ply when drying by turning the switch
»d« (cold air setting).
Note
The cold air setting interrupts the hot air
7
operation and provides a cool air flow. This
allows you to fix your hairstyle better and
more lastingly.
INFORMATION
Environmental note
This product has been made from high-
quality parts and materials which can
be re-used and recycled.
Therefore, do not throw the product
away with normal household waste at
the end of its service life. It should be taken to a
collection point for recycling electrical and elec-
tronic devices. This is indicated by this symbol on
the product, in the operating manual and on the
packaging.
Please find out about collection points operated
by your local authority.
Help protect the environment by recycling used
products.
__________________________________________________________
into the wall socket.
D
and
C
to
C
_____________________________________________________
5 After use, switch off the appliance with the
button and pull out power cord
wall socket.
Caution
Never wind the power cord around the app-
7
liance, as this can result in damage.
Check the power cord and the appliance
regularly for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft dry cloth for cleaning the housing.
Remember to clean the air inlet grille
sionally with a soft brush to remove any hairs
and dust.
Technical data
This product conforms to the
European directives 2004/108/EC,
2006/95/EC, 2009/125/EC and
2011/65/EU.
Power supply
230 – 240 V ~ , 50 – 60 Hz
Power
750 – 800 W
Technical and design modifications are reserved.
C
from the
D
occa-
E
13
ENGLISH